Saturday 20 April 2013

Virtual Router Problems

When you click " Start Virtual Router " it say

 " Virtual Router Could Not Be Started " 
( In Virtual Router Manager v0.9 )

or

" The Group Or Resource  Is Not In The Correct State To Perform The Requested Operating Error " 
( In Virtual Router Manager v1,0 )

How to solve this problem? It's easy.

1. Open Network Sharing and Center.

2. Click Change adapter settings at the left tab.
You window will be like this :

3. Right click Wireless Network Connection 2.

4. Click disable. Then right click again and click enable.

5. Open Virtual Router Manager and Start Virtual Router.

Enjoy!

If you have problem, post comment and I'll help you.
Posted by at
Labels: , , ,

26 comments:

  1. Rynmyn26 April 2013 at 22:25

    This did not solve the error "the group or resource is not in the correct state..."

    ReplyDelete
    Replies
    1. PCoxide4 July 2013 at 04:39

      Hey,

      I found the reason I was having this problem.
      The Microsoft Virtual WiFi Miniport Adapter wasn't working.
      To make sure it's working do the following:
      1) Open an elevated Command Prompt window
      2) type:
      netsh wlan set hostednetwork mode=allow

      or
      Here's a Hotfix available from Microsoft for a common cause of this problem on Windows 7 and Windows Server 2008 R2:
      http://support.microsoft.com/kb/2496820

      If the hotfix doesn't work, or you aren't using Windows 7 or 2008 R2, then you could try some of the suggestions at the following link:
      http://superuser.com/questions/373861/how-can-i-start-hostednetwork-on-windows-7

      Delete
    2. mayank229 October 2013 at 23:14

      Thanks so much! It worked for me too!

      Delete
    3. Unknown28 November 2013 at 08:39

      This solve is a better!!!!! Thank you very much !!!

      Delete
    4. Unknown30 December 2013 at 14:25

      command prompt solves the problem

      Delete
  2. Anil Nandam14 May 2013 at 22:52

    Thanks for this post. I installed Virtual Router today and I dont see any adapter called "Wireless Network Connection 2".
    I have the following.
    - Ethernet - Physical Adapter
    - Reliance - This is my my wireless modem
    - WiFi
    - VMware Network Adapter VMnet1
    - VMware Network Adapter VMnet8

    I keep getting the error message "the group or resource is not in the correct state". And I only see the VMware network adapters in the Virtual Router Shared networks dropdown.

    Please help. I am using Windows8 64bit on Dell Studio XPS16

    ReplyDelete
  3. Unknown15 May 2013 at 02:49

    the microsoft virtual wfi miniport adapter isnt working properly..thats my proble.. on my device manager..

    ReplyDelete
  4. Unknown2 July 2013 at 18:51

    got no result loser

    ReplyDelete
  5. Mariusbon19 July 2013 at 05:46

    Go to Control Panel->Network and sharing center->left click on Local area conection (right side)-> Properties-> Sharing-> Settings-> check all boxes (this is what i did, and it worked)

    ReplyDelete
    Replies
    1. ORO198921 September 2013 at 23:10

      Thank you!!!!!!! this worked for me! :)))

      I've been trying to figure things out for more than a week and even resorted to virtual routers which, unfortunately, did not start running.

      Thank you sooooooo much!

      Delete
  6. laxman21 July 2013 at 02:51

    The group or resource is not in the correct state to perform the requested opera
    tion. problem shown in cmd ....

    ReplyDelete
  7. Son Tung1 October 2013 at 23:10

    thank you. I solved this problem. When my device( ipod touch gen 5) connected with it but it still can't online. Can you help me?

    ReplyDelete
  8. Rupam Talukdar9 October 2013 at 21:31

    I can't find any Wireless Network Connection 2 in my adapter settings.....plz help

    ReplyDelete
  9. Rajesh Kamboj23 October 2013 at 05:15

    Thanx buddy, It worked in my Windows 8 x64

    ReplyDelete
  10. sixteencolourpencils29 October 2013 at 08:57

    Hi. I have a similar problem as Son Tung. My phone was able finally able to connect with it but I can't access anything online :(

    ReplyDelete
  11. Unknown6 December 2013 at 05:35

    thank u !

    ReplyDelete
  12. Unknown15 December 2013 at 20:46

    thanks boss!!

    ReplyDelete
  13. Unknown17 December 2013 at 02:01

    supported hardware may not have been found. how to fix this?

    ReplyDelete
  14. Cash6 January 2014 at 09:41

    In administrator:command prompt. when i entered this command (netsh wlan start hostednetwork) it show. The group or resource is not in the correct state to perform the requested opera
    tion.
    i havw want to creat hostpot wifi in my laptop win8 pls tell me this problem solution

    ReplyDelete
  15. Unknown12 June 2014 at 13:57

    adnistrator command promp;when i type the 'netsh wlan start hostednetwork'
    it shows the group or resource is not in the correct state to perform the requisted operation..
    plz reply.......

    ReplyDelete
  16. Unknown5 July 2014 at 06:15

    Go to Device Manager, under Network Adapters, enable Microsoft Virtual Wifi miniport Adapter

    ReplyDelete
  17. Kris26 December 2014 at 05:05

    Thanks alot this worked for me.

    check my blog too www.netinfoNG.com

    ReplyDelete
  18. Mido6 January 2015 at 08:30

    hello , my virtual wifi hotspot on win7 , its activity always received 0 , it is running and my samsung s3 connected on it but no internet and none of the above advices ever worked with me

    many thanks

    ReplyDelete
  19. Don10 April 2015 at 02:47

    I am Using windows 8.1.
    I tried all the suggestions mentioned here. Still no go.
    Does anyone have a method that will work, otherwise I will just give up.

    ReplyDelete
    Replies
    1. Don10 April 2015 at 18:42

      After trying all the other alleged solutions, this finally worked.
      1. Go to "Admin Command Prompt"
      2. then type the following:
      netsh wlan set hostednetwork mode=allow ssid=VirtualRouter key=123456789 (password)
      3. Enter
      3. then type :
      netsh wlan start hostednetwork
      4. Enter
      Then connect to internet

      Delete

Subscribe to: Post Comments (Atom)